Masterline 8 Pivot doors

You are here

Masterline 8 Pivot doors

Steps :
Preparations
  • Cut the changeover profile to specifications
 
Assemble vent part
  • Create vent assembly
  • Insert gaskets and mount the changeover profile
  • Mount the bottom pivot box + finishing profiles
  • Insert the top pivot box
 
Assemble frame part
  • Insert gaskets in profiles
  • Mount changeover profile on frame profile
  • Drill drainage holes in threshold
  • Seal off end pieces and assemble frame profiles with changeover profiles to threshold profiles
  • Mount top and bottom pivot boxes
 
Join vent and frame part
  • Insert lower pivot point first
  • Lower top pivot axle into vent via screw
 
Finish element
  • Insert thershold covers
  • Apply glass supports
  • Insert automatic drop seal
  • Insert lock receivers and guiding blocks
  • Mount opening limiter
 
When using motorised locks:
Make sure to the door cannot be closed before funcionality of the eletric circuit has been checked.
  • Apply cable loom
  • Plug in locks and contacts
  • Insert locks and perform functionality check
  • Close the door

BACK TO OVERVIEW