Moving from design to production of the brise soleil, the contractor and Reynaers Aluminium came up with a technical proposition by tailoring the existing BS 100 system to the design needs. This solution consists of no less than 63,000 meters of profiles. This delicate and functional ‘skin’ adapts to the façade orientation. For example, the lower position of the sun in the west and east requires smaller distances between the brise soleil slats than the higher position of the sun in the south. Much attention was also paid to the transition from public to semi-public and private spaces by playing with degrees of brightness.
Collaboration between Architect and Manufacturer
As the construction of the hospital was submitted to public tendering, VK Architects & Engineers could not select any preferred manufacturer nor subcontractor beforehand. Following award of the contract, the contractor MBG and subcontractor Couwenberghs-Schellekens proposed Reynaers Aluminium. After a tour of the Reynaers’ facilities, Reynaers Aluminium was brought on board the project team.
Starting from the detailed design of the brise soleil by VK Architects & Engineers, a close collaboration between manufacturer, contractor and architect was established in order to come to a workable technical solution. ‘One of the key elements in this project was the wind tunnel test to verify the overall resistance to wind loads and acoustical impact. This test convinced everybody of the quality of the technical solution provided by Reynaers,’ says architect Erik Vereecken, Project Director Healthcare at VK Architects & Engineers.